Subject: cas 31498 P# A207201A re: *.gm1 shorting
From: "Darin Semmen" <dsemmen@4pcb.com>
Date: Fri, 6 May 2011 12:14:19 -0600

Hi Kevan,

            I have reviewed the files regarding the shorting on the
boards.  The AC cam engineer incorrectly moved the outer edge trace
inward by 0.010, thus reducing the trace to trace spacing to 0.003.
Thus the original files were correct, jus the cam engineer misunderstood
inner layer copper to edge of board spacing.

            The charge for test would have been $140.00.  Test can be
added to the next order at no charge, or I can email a $140.00 discount
code, or a refund of $140 can be issued to the Visa credit card.  Please
let me know your preference.

Regards,
Darin